MINI NUTS & BOLTS
Our miniature nut and bolt line includes both 00-90 and 0-80 parts. Both sizes are precision machined, not rolled. Available in solid brass or with our exclusive plating in fine silver, 22k gold or heavy black oxide. We recommend our Socket Wrenches to ease installation.
22K Gold Plate shown
00-90 0-80
TIP:
If using hex head bolts and nuts, get 2 wrenches--one for both ends. It's worth your sanity--we promise!
Please specify size, head type, length and color when ordering.
* These styles are being discontinued. Limited to stock on hand.
1/8" x 00-90 Bolts only. Please specify Head type: Hex, Flat or Fillister
​
$.21
.25
.28
.27
$1.99
2.23
2.59
2.47
$18.26
20.46
23.76
22.66
$157.70
176.70
205.20
225.70
1/4" x 00-90 Bolts only. Please specify Head type: Hex, Flat or Fillister
Brass (No Hex)
Fine Silver Plate (Flat Only)
Black Oxide Plate
22k Gold Plate (No Hex)
$.26
.29
.33
.31
$2.43
2.67
3.03
2.91
$22.26
24.46
27.76
26.66
$192.28
211.28
239.78
230.28
00-90's
Brass (No Hex)
Fine Silver Plate (No Hex)
Black Oxide Plate
22k Gold Plate (No Hex)
$.16
--
.18
--
--
--
.21
--
Nuts & Washers 00-90
Brass washer
Brass nut SOLD OUT
Fine Silver Plate washer
Fine Silver Plate nut SOLD OUT
Black washer SOLD OUT
Black nut SOLD OUT
22k Gold Plate washer
22k Gold Plate nut SOLD OUT
$1.45
--
1.69
--
--
--
1.93
--
$13.31
--
15.51
--
--
--
17.71
--
$114.95
--
133.95
--
--
--
152.95
--
Each 10 100 1000
0-80's
Each 10 100 1000
1/4" x 0-80 Bolts only. Please specify Head type: Flat or Fillister
Brass
Fine Silver Plate
Black Oxide Plate
22k Gold Plate
$.26
.29
.33
.31
$2.43
2.67
3.03
2.91
$22.26
24.46
27.76
26.66
$192.28
211.28
239.78
230.28
1/4" x 0-80 Bolts only. Hex Head
Brass
Fine Silver Plate
Black Oxide Plate
22k Gold Plate
$.44
.47
.51
.31
$4.08
4.32
4.68
2.91
$37.40
39.60
42.90
26.66
$323.00
342.00
370.50
230.28
3/8" x 0-80 Bolts only. Please specify Head type: Flat or Fillister
Brass
Fine Silver Plate
Black Oxide Plate
22k Gold Plate (Flat only)
$.32
.36
.40
.38
$3.03
3.27
3.63
3.51
$27.83
30.03
33.33
32.23
$240.35
259.35
287.85
278.35
3/8" x 0-80 Bolts only. Hex Head
Brass
Fine Silver Plate
Black Oxide Plate
22k Gold Plate
$.57
.60
.64
.38
$5.28
5.52
5.88
3.51
$48.40
50.60
53.90
32.23
$418.00
437.00
463.50
278.35
Nuts & Washers 0-80
Brass washer
Brass nut
Fine Silver Plate washer
Fine Silver Plate nut
Black Oxide Plate washer
Black Oxide Plate nut
22k Gold Plate washer SOLD OUT
22k Gold Plate nut
$.34
.44
.36
.47
.40
.51
--
.24
$3.12
4.08
3.36
4.32
3.72
4.63
--
2.20
$28.60
37.40
30.80
39.60
34.10
42.90
--
20.13
$247.00
323.00
266.00
342.00
294.50
370.50
--
173.85
Hex
Flat
Discontinued
Fillister
Discontinued
0-80 Threaded Rods
We carry these rods to add versatility to projects using nuts and bolts. Perfectly machined, not rolled threads. 12" lengths only.
Brass $31.50 ea
303 Stainless Steel 68.00 ea
00-90 or 0-80 EZ Socket Wrench
Aluminum socket wrenches are a necessity when using hex nuts. Pliers will surely slip and scratch your work. Hex head bolts with hex nuts require two, one for the head and one for the nut. Specify 00-90 or 0-80.
00-90 $6.70 ea
0-80 $7.72 ea
Mixed Nut & Bolt Kits
The kit contains 12 hex heads in brass, fine silver and black plate with matching washers and nuts. 108 total pieces plus 2 EZ Socket Wrenches!
1/4 inch x 0-80 kit $53.18
3/8 inch x 0-80 kit $57.06
1/4" Kit shown
Miniature Hand Taps & Dies
Now, thread and tap your own parts. Three flute plug taps thread the inside of a hole; dies cut threads on wire to make screws. Check the chart at the bottom of the page for proper size. For best results use the EZ Tap & Die Holder below and Anchor Lube. Carbon steel. For hand use only!
Taps 2-56 $3.60 ea
(see below for 0-80)
Dies 0-80, 1-72 or 2-56 $35.00 ea
Die Handle
All aluminum construction with a knurled, sure grip handle. Fits the above dies.
$13.90
Tap Handle
Wood handle with 2 chucks. Adjustable opening from 0.00" to 1.29". Perfect handle to use with all of our taps. Can also be used as a pin vise. Overall length 3.25"
$13.90
Machine/Hand Taps
High speed steel plug taps can be used for hand use with our Tap Handle (above) or for machine tapping projects. .107" square base.
0-80 $4.29 ea
Drill Bits
Drills cut exactly right to match our taps. High speed steel is recommended for titanium, niobium and general drilling. Cobalt, a harder steel, is recommended for hard materials like stainless steel, brass and for long life. Clearance drills produce a hole that a bolt passes through without touching. Tap drills leave the material needed to cut threads in a hole. See the chart below for the proper sizes. Purchase any ten and save 10%!
Size High Speed Steel Cobalt
#43, 48, 50, 52, 53 $.74 ea $2.68 ea
#54 - $2.88 ea
#55 $.74 ea $2.88 ea
#62 $.74 ea $3.22 ea
Tap & Clearance Drill Specifications
Clearance drill bit
Tap & Die
Wire size
Tap drill bit (threaded hole)
00-90
0-80
1-72/1-64
2-56
16ga Special
.047in (17-18ga)
.060in (14-15ga)
.073in (13ga)
.085in (11-12ga)
.051in (16ga)
#62/.038in/0.97mm
#55/.052in/1.30mm
#53/.0595in/1.50mm
#50/.070in/1.78mm
#57/.043in/1.10mm
#55/.052in/1.30mm
#52/.0635in/1.61mm
#48/.076in/1.93mm
#43/.089in/2.26mm
#54/.055in/1.40mm
.