|
|
 |
|
MINI Grabber with Niobium Tip
|
|
This is our exclusive non-corroding submersible MINI Grabber. We modify it just for anodizing. Contact is .025" niobium wire with a stainless steel spring and glass filled insulation. The jaw is very small and will help prevent contact marks on delicate work. Use with both niobium and titanium! The banana plugs are stackable so you can run multiple grabbers on their 36 inch leads.
$8.40 ea
|
|
|
Multi-Etch
|
|
|
|
An anodizing breakthrough! At last a safer way to prepare titanium for high voltage anodizing. Contains no hydrofluoric or nitric acids! Cleans niobium and erases anodized mistakes. It etches copper, brass, pewter, steel and will clean light fire scale from sterling. Multi-Etch is shipped dry in its own one gallon storage container. All you do is add distilled water. Works best in a heated acid resistant container (plastic in a double boiler) and requires positive ventilation and safety equipment. Do not use or store in glass!
Hazardous material shipping required. Domestic shipping only.
Shipped via UPS Ground Only.
|
One gallon:
|
$34.24
|
|
Two gallons:
|
$68.48
|
|
Three gallons:
|
$97.59
|
|
Four gallons:
|
$127.36
|
|
TOLL FREE
ORDER LINE
(800) 876-3434
24 hr FAX
(928)634-6734
|
|
|
|
|
|
|
TSP Not!
|
|
|
The manufacturer calls it TSP but it's not! No phosphates! Environmentally safe electrolyte. Works just like the trisodium phosphate we have recommended for years without the phosphate pollution. 1 1/3 cups per gallon distilled water. The 26 oz. box makes over five gallons of 3.5% electrolyte.
|
|
|
|
|
Anodizers' Tape
|
|
|
This is a special transparent, electrically resistive tape. It is the single most effective masking medium used today. If you anodize, you need this product on your workbench! 72 yard roll.
1/16"width
|
$5.53
|
|
2" width
|
$34.55
|
|
4" width
|
$69.10
|
|
|
|
|
|
Platers' Tape
|
|
|
This is a highly effective opaque masking tape that can be used in most electroplating, anodizing (aluminum too) and etching processes. It is so resilient it makes a great sandblast mask. It stretches up to 225%. 36 yard roll.
| 2" width |
$41.54 |
| 4" width |
$82.80 |
|
|
|
|
|
PRESS-n-PEEL
PnP Blue
|
|
At last an iron on mask that really works! Make printed designs for anodizing and acid etching in minutes. Print your designs direct from a laser printer or photo copier. PnP Blue has two layers of special material. Your design is printed on the blue layer. When the image is ironed on to the metal the blue transfers too. This adds an extra thick coating of protection. Tests in our studio indicate that the coating holds up well to 100 volts.
For workers in non-ferrous metals this is a resist made for you. It works well in ferric chloride, ammonium persulfate and sodium persulfate diluted to manufacturer's specifications. A household iron is all you need. After use the resist is easily removed with lacquer thinner.
- 5 sheet pack...... $8.08
- 20 sheet pack.... $32.33
- 100 sheet pack...$142.65
|
|
PNP Transfer Iron
|
|
|
The system is now complete. The perfect iron for PNP Blue and other heat sealable films. A dedicated, adjustable heat tool designed for heat sealing, not pressing pants. The small foot print allows for fast, controlled heat transfer. Complete with a teflon cover for non-stick performance and instructions for metal transfers 1.5" x 4" base, 115V/60Hz |
|
| Iron w/ teflon cover |
$112.00 ea |
| Teflon covers |
$1.46 ea |
| Transfer Iron Kit |
|
| Includes: Iron, 2 extra covers & 5 shts PNP Blue |
$114.56 ea |
|
|
Hallmarking Stamps
|
|
Our stamps are made of the finest domestic tool steel, hardened by deep heat-treating. All stamps are straight (3 1/4") with 1mm lettering. Guaranteed against defects in workmanship and materials. Please wear eye protection.
|
NIOBIUM
|
$15.10 ea |
|
Nb
|
$9.60 ea |
|
TITANIUM
|
$15.10 ea |
|
Ti
|
$9.60 ea |
|
1/8 22KGF (for 22K BI-METAL)
|
$15.10 ea |
|
©(Copyright)
|
$9.60 ea |
|
|
|
|
SPARKLE!
Light gathering surfaces enrich colors and add depth. Try sand & glass bead blasting sanding, scratching and tooling marks of all kinds. Check out our special Scotch-Brite Pads
Roughage!
Rough up your surfaces with abrasives. Give them some tooth for better adhesion.
|
|
|
Similar to the grocery store variety pot scrubbers, but loaded with sharp abrasives! Their soft, flexible action follows the contours of your work for an even scratch finish. Unlike sandpaper, these pads do not remove metal.
|
Scour texture
|
$ per pad
|
|
Ultra fine silicon carbide
|
1.63
|
|
Fine aluminum oxide
|
1.82
|
|
Coarse silicon carbide
|
3.70
|
|
|
|
E6000 Adhesive
|
|
|
|
This is the most advanced, strongest and most versatile adhesive technolgy available today. It is a clear viscous polystyrene formula that creates a chemical bond to either porous or non-porous, even rough surfaces. It is ideally suited for findings. Sniptip dispenses just the right amount.
3.7 oz tube with 2.5" Snip tip
$5.77 each
|
![[ReactiveMetals Studio, Inc.]](../BRMSWebLogo.jpg)
