101A Air Park Rd • Cottonwood, AZ 86326 (shipping) • PO Box 890 • Clarkdale, AZ 86324 (mailing)

Voice (928) 634-3434 • FAX (928) 634-6734
Order Line (800) 876-3434

For the most current pricing, please call or download our

PDF catalog from the home page.

Get Our
Order Form here!

24 hr FAX
(928)634- 6734

TOLL FREE
ORDER LINE
(800) 876-3434

Year 2005

ANODIZERS

SPARKLE!
Light gathering surfaces enrich colors and add depth. Try sand & glass bead blasting sanding, scratching and tooling marks of all kinds. Check out our special
Scotch-Brite Pads.

Roughage! Rough up your surfaces with abrasives. Give them some tooth for better adhesion.

Mini-Grabber
with Nb Tip

Anodizers Tape

Get Our
Order Form here!

TOLL FREE
ORDER LINE
(800) 876-3434

24 hr FAX
(928)634-6734

Reactive

*SMT Micro Anodizer**
	0-120 Volts, 0-1Amp and solid state. This is the best yet with precision 10 turn voltage control. Enough control for the smallest high voltage work and power to run larger baths. It is the right anodizer for everything from one of a kind to mass produced small parts. Output through either the banana plugs or hard wired concealed front panel lugs. Each unit includes two: sets of leads, stainless steel cathode, instructions, rubber gloves(Indicate Sm, Med or Lrg), and Studio Preparation and Coloring of Titanium by Bill Seeley. Full support from Reactive Metals Studio and a full one year manufacturers warranty. Input 110-127VAC +/- 10% 50Hz +/- 2% Dimensions: 7 in. H x 5 in. W x 10 in. D (180mmW x 130mmH x 300mmD) Weight 15lbs(6.8kg)
*Surface Mount Technology - A method of assembling printed circuit boards where the components are mounted onto the surface of the board rather than being inserted into holes in the board. It allows smaller component size, improves signal speed, increases reliability and automation in manufacturing, and requires less handling of parts.
See product instructions here. (Requires Adobe PDF Reader).
Price $209.26 each
Complete SMT MICRO
Includes the SMT Micro, one roll of 2" Anodizers Tape, one MINI Grabber, and a Niobium Starter Kit. Save 5%. Price $288.66 $239.94 (without Nb Kit)

New Commercial Anodizer
Our new Xantrex commercial anodizers feature all the power and less than one quarter the weight of our previous commercial size unit. Power factor correction gets a full 150 volts from a 120VAC/15amp outlet. Both voltage and amperage register accurately on digital meters. Current Limit Preview lets you preset the amperage at the touch of a button. Controls are ten turn pots for very accurate settings. Uses minimal bench space in a 3-1/2" high, 8-1/2" wide by 19 " package. Comes complete with two 36" leads, gloves, stainless steel cathode foil, instructions, "Studio Preparation and Coloring of Titanium". Five year manufacturer's warranty. Two models available: 0-4amps, 0-7amps.

0-7amps $2337.05