|
|
|
 |
|
Our titanium sheet and wire products are all Grade #1 Commercially Pure. They are ductile and can be formed with some effort. It takes a heavy hand to forge titanium, but it work hardens slowly. Industrially it is vacuum or inert gas annealed. Titanium can be heat colored, though the results are less predictable than anodizing. It is corrosion resistant and hypoallergenic.
|
|
|
|
Titanium Breakthrough
|
| Multi-Etch pretreatment makes bright colors available on titanium. Now, without strong acid mixtures, high voltage anodized color can be produced on titanium. Properly used, it preserves surface finishes, erases color errors and expands the color range on titanium. |
|
|
|
|
|
|
|
Ti Sheet
|
The natural colors.
|
|
This annealed Grade #1 sheet is specially etched to our specifications. Surface finish and hardness will vary. Multi-Etch is the non-acid preparation for high voltage anodizing of titanium. Minimum sheet 3 x 3 inches, larger in 3 inch increments only.
|
$/12" x 12"
|
$/6" x 12"
|
$/sq in
|
| 22 ga (.025"/0.635mm) |
$75.58
|
$37.79
|
$.53
|
| 26 ga (.016"/0.406mm) |
$39.48
|
$19.74
|
$.28
|
|
|
|
Ti Embossed Sheet
|
|
|
|
Grade #1 titanium with a beautiful roller embossed surface. Both sides are textured and plastic coated. Annealed and very ductile.
|
$/12" x 12"
|
$/6" x 12"
|
$/sq in
|
| 26 ga (.016"/0.406mm) |
$53.13
|
$26.57
|
$.37
|
|
|
|
Ti Round Wire & Rod
|
Titanium
Reference Data
Heat coloring
Titanium can be heat colored with a small torch or kiln.
Multi-Etch
TitaniumErase color errors & more!
Light gathering surfaces enrich colors and add depth. Try sand & glass bead blasting, sanding, scratching and tooling marks of all kinds.
|
|
Custom drawn Commercially Pure Grade #1 Titanium specially acid cleaned for jewelry applications. Multi-Etch provides the perfect surface for bright, high voltage anodizing. One foot increments only. Available in coil and straight rod, 6 inch minimum.
|
|
$ Per Foot
|
| 1" (1.00"/25.40mm) |
annealed *Straight
|
$180.00
|
| 4 ga (.212"/5.380mm) |
annealed
|
$6.36
|
| 8 ga (.125"/3.175mm) |
annealed
|
4.36
|
| 10ga (.102"/2.590mm) |
annealed
|
1.53
|
| 12 ga (.081"/2.057mm) |
annealed
|
1.05
|
| 12 ga (.081"/2.057mm) |
annealed *Straight
|
1.16
|
| 14 ga (.063"/1.626mm) |
half-hard
|
.85
|
| 16 ga (.051"/1.295mm) |
half-hard
|
.57
|
| 16 ga (.051"/1.295mm) |
half-hard *Straight
|
.57
|
| 18 ga (.040"/1.016mm) |
annealed
|
.46
|
| 20 ga (.032"/0.812mm) |
annealed
|
.33
|
| 24 ga (.020"/0.505mm) |
annealed
|
.18
|
| 30 ga (.010"/0.025mm) |
annealed
|
.067
|
|
|
|
Ti Seamless Tubing
|
Tube bending
Soft tubing may need fine sand as a filler to support tightly curved forms. Fill the tube with very fine sand, cap the ends & bend over a mandrel.
|
|
Grade #2 titanium, thick walled (.035"/0.9mm) tubing. Very hard! No longer available.
| Outside Diameter |
$/ft |
$/in |
|
1/8 in (2.8mm)
|
|
|
|
|
|
Titanium Starter Kit
|
|
|
|
Includes: "A Guide to Using the Reactive Metals", Sheet: 3"x 6"x 22ga, 3"x 6"x 26ga, 3"x3"x26ga Embossed:
Wire: 3' 16ga, 10' 18ga, 12' 20ga, 20' 24ga.
Save 15%!
$26.31
|
|
|
|
|
|
|
![[ReactiveMetals Studio, Inc.]](../BRMSWebLogo.jpg)
